Negotiable
The date of payment from buyers deliver within days
Sichuan
Long-term effective
2022-03-07 22:08
104
Company Profile
Chengdu Holy Valve & Complete Equipment Co., Ltd.By certification [File Integrity]
Contact: cdlh888(Mr.)
Email:
Telephone:
Phone:
Area: Sichuan
Address: Sichuan
Website: http://www.api6d-valve.com/ http://cdlh888.ehomey.net/
Introduction
Through Conduit Gate Valves designed to API 6D and 6FA are custom manufactured by Holy Valve and supplied with Flanged, Butt Weld, Socket Weld, Hub Connectors, Compact Flange or other proprietary connections. Pressure ratings up to ANSI #2500Lb, temperature ranges from -46 to +175 Deg C and bore sizes from 2”to 42". All Holy Through Conduit Gate Valves have their sealing surfaces hard faced with tungsten carbide and can be configured with either Pneumatic or Hydraulic Actuators. All valves are available in standard and exotic materials.
Technical Specifications
Suitable Medium: |
Purified natural gas, natural gas with sulphur(H2S+CO2≤8%), coal gas, crude oil, finished oil, refinery oil, clean oil and water, etc. |
Suitable Temperature: |
-101℃~121℃(For super low temperature valve) |
Pressure rating: |
PN1.6~42.0MPa (class150 ~ 2500) |
Size: |
DN25~1200 (NPS1 ~48) |
Codes and Standards
Design and manufacture |
API 6D |
End to end/Face to face dimension |
API 6D/ASME B16.10 |
Flange Dimension |
ASME B16.5 / ASME B16.47 |
Welded ends dimension |
ASME B16.25 |
Fire safe design |
API 6FA |
Wall thickness |
ASME B16.34 |
Testing |
API 6D |
Features of Pneumatic Through Conduit Gate Valves
1.Seats performance characteristics for low pressure, two-way isolation, and adjustable sealing valves.
2. The calibrated special alloy springs are adopted, and the seats have the functions of elastic pre-tensioning and pressure intensification. The spring pre-tensioning force provides the sealing specific pressure under the conditions of low pressure and low pressure, and realizes the sealing performance under micro pressure and low pressure. With the thrust of the upstream medium on the seat, the valve front sealing of the upstream seat and the downstream seat can be realized forced sealing, so the valve does not leak even at the minimum pressure difference.
3. Stem sealing structure
Our company adopts a combined sealing structure of a variety of sealing materials for stem sealing. The structure includes the back seat welded on the bonnet, and the back seat and blow-out prevention structure is formed by using the cone surface of the stem. A self-tightening sealing ring is installed at the bottom of the packing, which can use the medium pressure to self-tighten and compensate the packing. The packing adopts the combination of V-shaped packing and expanded graphite packing, which can realize fire proof and compensation for packing because of wear. An isolation lantern ring is set in the middle of the packing to form a sealant injection channel for internal and external sealing sealant. We also arrange a closed packing adjustment device at the upper end of stuffing box, which can pre-tighten and compensate the packing.
4. The stem packing adopts the combination of rectangular expanded graphite and V-shaped PTFE packing, which effectively utilizes the adjustability of the V-shaped packing and the fire resistance of the graphite packing. The packing gland can be used to pre-tighten the packing and use the inner cavity pressure to self-tighten the packing. With the back seat structure of the stem, better fireproof performance can be obtained.
5. Each bonnet of the valve made by our company must pass specific and accurate calculation, we can provide the body-bonnet sealing calculations.
Product Supply Range
We can make pneumatic through conduit gate valves as below:
Class150: 1"~48"
Class300: 1"~42"
Class400: 1"~42"
Class600: 1"~40"
Class900: 1"~36"
Class1500: 1"~20"
Class2500: 1"~10"
Quality Control Activities:
Strictly implement the process specification. The production and processing of products must strictly follow the operating procedures and produce according to the process requirements. Because the manufacturing process is the direct process of product formation, the quality of products directly depends on the effective control of the process. The negligence of any link may lead to unqualified products. In addition, while producing in strict accordance with the process requirements, it is also necessary to improve the operation skills of production operators.
FAQ
Q1.What is your terms of packing?
A: LCL or FCL based on volume of cases. All the cases are suitable for sea transport
Q2.How about your delivery time?
A: Generally, we will ship within 30-45 days after receipt of formal purchase order, but the actual delivery time should be based on order qty and reception of payment.
Q3.Can you produce according to the samples?
A: Yes we can make valves as per your samples or technical drawings.
http://www.api6d-valve.com/